블로그 | 클럽씨유 CLUB CeoUniv

Mike Scott Mike Scott

0 강의 신청됨 • 0 완료된 코스

약력

真実的なCisco 100-150受験記対策 &合格スムーズ100-150テスト資料 |効率的な100-150専門知識訓練

早急に100-150認定試験に出席し、特定の分野での仕事に適格であることを証明する証明書を取得する必要があります。 100-150学習教材を購入すると、ほとんど問題なくテストに合格します。私たちの100-150学習教材は、高い合格率とヒット率を高めるので、テストにあまり合格することを心配する必要はありません。100-150練習エンジンのメリットと機能をさらに理解するには、製品の詳細な紹介。

だれでも成功したいのです。IT業界で働いているあなたはCiscoの100-150試験の重要性を知っているのでしょう。Ciscoの100-150試験に参加する人はますます多くなっています。競争がこのように激しい情況で勝つためにどうしますか。ふさわしいアシスタントを選ぶのは一番重要なのです。CertJukenはCiscoの100-150試験を長い時間で研究しますので、この試験を深く了解しています。我々提供するCiscoの100-150ソフトであなたはきっと試験に合格できます。

>> 100-150受験記対策 <<

試験の準備方法-検証する100-150受験記対策試験-素敵な100-150テスト資料

100-150試験問題は、重要なことに焦点を当て、目標を達成するのに役立ちます。レビュープロセスに緊張が生じると、100-150練習資料が問題を効率的に解決します。高品質の100-150ガイド資料と学習モードの柔軟な選択により、それらはあなたに便利さと容易さをもたらします。すべてのページは、明確なレイアウトと覚えておくと役立つ知識を持つ専門家によって慎重に配置されています。レビューのすべての段階で、100-150練習準備はあなたを満足させます。

Cisco Certified Support Technician (CCST) Networking 認定 100-150 試験問題 (Q34-Q39):

質問 # 34
Which two pieces of information should you include when you initially create a support ticket? (Choose 2.)

A. The description of the top-down fault-finding procedure
B. A description of the conditions when the fault occurs
C. A detailed description of the fault
D. Details about the computers connected to the network
E. The actions taken to resolve the fault

正解：B、C

解説：
* Statement A: "A detailed description of the fault." This is essential for support staff to understand the nature of the problem and begin troubleshooting effectively.
* Statement C: "A description of the conditions when the fault occurs." This helps in reproducing the issue and identifying patterns that might indicate the cause of the fault.
* Statement B: "Details about the computers connected to the network." While useful, this is not as immediately critical as understanding the fault itself and the conditions under which it occurs.
* Statement D: "The actions taken to resolve the fault." This is important but typically follows the initial report.
* Statement E: "The description of the top-down fault-finding procedure." This is more of a troubleshooting methodology than information typically included in an initial support ticket.
References:
* Best Practices for Submitting Support Tickets: Support Ticket Guidelines

質問 # 35
DRAG DROP
Move each protocol from the list on the left to the correct TCP/IP model layer on the right. Note: You will receive partial credit for each correct match.

正解：

解説：

Explanation:
Here's how each protocol aligns with the correct TCP/IP model layer:
TCP (Transmission Control Protocol): This protocol belongs to the Transport layer, which is responsible for providing communication between applications on different hosts1.
IP (Internet Protocol): IP is part of the Internetwork layer, which is tasked with routing packets across network boundaries to their destination1.
FTP (File Transfer Protocol): FTP operates at the Application layer, which supports application and end-user processes. It is used for transferring files over the network1.
Ethernet: While not a protocol within the TCP/IP stack, Ethernet is associated with the Network Interface layer, which corresponds to the link layer of the TCP/IP model and is responsible for the physical transmission of data1.
The TCP/IP model layers are designed to work collaboratively to transmit data from one layer to another, with each layer having specific protocols that perform functions necessary for the data transmission process1.
TCP: TCP Model Layer: Transport
The Transport layer is responsible for end-to-end communication and error handling. TCP (Transmission Control Protocol) operates at this layer to provide reliable, ordered, and error-checked delivery of data.
IP: TCP Model Layer: Internetwork
The Internetwork layer, also known as the Internet layer, is responsible for logical addressing and routing. IP (Internet Protocol) operates at this layer to route packets across networks.
FTP: TCP Model Layer: Application
The Application layer provides network services to applications. FTP (File Transfer Protocol) operates at this layer to transfer files between computers over a network.
Ethernet: TCP Model Layer: Network
The Network layer, also known as the Link layer in the TCP/IP model, is responsible for physical addressing and access to the physical medium. Ethernet operates at this layer to provide the physical and data link functions.
Transport Layer: This layer is responsible for providing communication services directly to the application processes running on different hosts. TCP is a core protocol in this layer.
Internetwork Layer: This layer is responsible for logical addressing, routing, and packet forwarding. IP
is the primary protocol for this layer.
Application Layer: This layer interfaces directly with application processes and provides common network services. FTP is an example of a protocol operating in this layer.
Network Layer: In the TCP/IP model, this layer includes both the data link and physical layers of the OSI model. Ethernet is a protocol used in this layer to define network standards and communication protocols at the data link and physical levels.
Reference: TCP/IP Model Overview: Cisco TCP/IP Model
Understanding the TCP/IP Model: TCP/IP Layers

質問 # 36
Which standard contains the specifications for Wi-Fi networks?

A. EIA/TIA 568A
B. IEEE 802.11
C. LTE
D. IEEE 802.3
E. GSM

正解：B

解説：
The IEEE 802.11 standard contains the specifications for Wi-Fi networks. It is a set of media access control (MAC) and physical layer (PHY) specifications for implementing wireless local area network (WLAN) computer communication in various frequencies, including but not limited to 2.4 GHz, 5 GHz, and 6 GHz1. This standard is maintained by the Institute of Electrical and Electronics Engineers (IEEE) and is commonly referred to as Wi-Fi. The standard has evolved over time to include several amendments that improve speed, range, and reliability of wireless networks.
Reference: =
* The Most Common Wi-Fi Standards and Types, Explained
* 802.11 Standards Explained: 802.11ax, 802.11ac, 802.11b/g/n, 802.11a
* Wi-Fi Standards Explained - GeeksforGeeks

質問 # 37
During the data encapsulation process, which OSI layer adds a header that contains MAC addressing information and a trailer used for error checking?

A. Data Link
B. Transport
C. Session
D. Network

正解：A

解説：
During the data encapsulation process, the Data Link layer of the OSI model is responsible for adding a header that contains MAC addressing information and a trailer used for error checking. The header typically includes the source and destination MAC addresses, while the trailer contains a Frame Check Sequence (FCS) which is used for error detection1.
The Data Link layer ensures that messages are delivered to the proper device on a LAN using hardware addresses and translates messages from the Network layer into bits for the Physical layer to transmit. It also controls how data is placed onto the medium and is received from the medium through the physical hardware.
Reference: =
The OSI Model - The 7 Layers of Networking Explained in Plain English
OSI Model - Network Direction
Which layer adds both header and trailer to the data?
What is OSI Model | 7 Layers Explained - GeeksforGeeks

質問 # 38
Which protocol allows you to securely upload files to another computer on the internet?

A. NTP
B. HTTP
C. ICMP
D. SFTP

正解：D

解説：
SFTP, or Secure File Transfer Protocol, is a protocol that allows for secure file transfer capabilities between networked hosts. It is a secure extension of the File Transfer Protocol (FTP). SFTP encrypts both commands and data, preventing passwords and sensitive information from being transmitted openly over the network. It is typically used for secure file transfers over the internet and is built on the Secure Shell (SSH) protocol1.
Reference: =
* What Is SFTP? (Secure File Transfer Protocol)
* How to Use SFTP to Safely Transfer Files: A Step-by-Step Guide
* Secure File Transfers: Best Practices, Protocols And Tools
The Secure File Transfer Protocol (SFTP) is a secure version of the File Transfer Protocol (FTP) that uses SSH (Secure Shell) to encrypt all commands and data. This ensures that sensitive information, such as usernames, passwords, and files being transferred, are securely transmitted over the network.
* ICMP (Internet Control Message Protocol) is used for network diagnostics and is not designed for file transfer.
* NTP (Network Time Protocol) is used to synchronize clocks between computer systems and is not related to file transfer.
* HTTP (HyperText Transfer Protocol) is used for transmitting web pages over the internet and does not inherently provide secure file transfer capabilities.
Thus, the correct protocol that allows secure uploading of files to another computer on the internet is SFTP.
Reference: =
* Cisco Learning Network
* SFTP Overview (Cisco)

質問 # 39
......

購入前にCertJukenが提供した無料の100-150問題集をダウンロードできます。自分の練習を通して、試験のまえにうろたえないでしょう。CertJukenを選択して専門性の訓練が君の100-150試験によいだと思います。

100-150テスト資料: https://www.certjuken.com/100-150-exam.html

Cisco 100-150受験記対策あなたが紙で勉強することに慣れている場合、このバージョンはあなたに適しています、100-150学習ガイドを使用すると、100-150試験に合格できます、100-150テスト資料トレーニングエンジンの初心者である場合は、疑わしいかもしれませんが、参照用に無料のデモが提供されています、ご覧のように、我々の100-150最新問題集資料は確かにあなたのお金を節約し、様々な方法で消費者としてのあなたの権利を保障します、Cisco 100-150受験記対策ゲストがさまざまな方法で勉強できるように、ゲストのニーズを満たすために3つの異なるバージョンを用意しました、現時点で我々サイト100-150 試験問題集を通して、試験に合格できるかどうかのを心配することがありませんよ。

この講義の冒頭の引用によると、すべてが主人公の周りの悲劇になることも知っています、それはただのデコピンに見えた、あなたが紙で勉強することに慣れている場合、このバージョンはあなたに適しています、100-150学習ガイドを使用すると、100-150試験に合格できます。

認定する-ハイパスレートの100-150受験記対策試験-試験の準備方法100-150テスト資料

CCSTトレーニングエンジンの初心者である場合は、疑わしいかもしれませんが、参照用に無料のデモが提供されています、ご覧のように、我々の100-150最新問題集資料は確かにあなたのお金を節約し、様々な方法で消費者としてのあなたの権利を保障します。

ゲストがさまざまな方法で勉強できるよ100-150うに、ゲストのニーズを満たすために3つの異なるバージョンを用意しました。